-
0010-20252 Wafer Rotation Assy
0010-20252 Wafer Rotation Assy. 2nd Source New. AMAT Endura 5500 PVD.
-
0010-36522 EDGE RING
0010-36522 EDGE RING . 2nd Source New.
-
0021-22028 PEDESTAL,8" 101 COVERAGE ENTIRE TEXTURED
0021-22028 PEDESTAL,8 101 COVERAGE ENTIRE TEX . 2nd Source New. Endura 5500 PVD.
-
0020-26583 6" Shutter Disk1
0020-26583 6 Shutter Disk1 . 2nd Source New. Endura 5500 PVD.
-
0021-35753 Ring Isolator TXZ 150MM SMF
0021-35753 Ring Isolator TXZ 150MM SMF . 2nd Source New. Endura 5500 PVD.
-
0020-40946 CLAMP RING, 8" SNNF, AL
0020-40946 CLAMP RING, 8 SNNF, AL . 2nd Source New. Endura 5500 PVD.
-
0020-27702 CLAMP RING 8INCH SNNF TI 1
0020-27702 CLAMP RING 8INCH SNNF TI 1 . 2nd Source New. Endura 5500 PVD.
-
0040-33998liner Slit Liner Door
0040-33998LINER SLIT LINER DOOR . 2nd Source New. AMAT CENTRURA 5200 MXP.
-
0020-20691 PEDESTAL CD/PT WAFER200 MM
0020-20691 PEDESTAL CD/PT WAFER200 MM . 2nd Source New.
-
0020-20897 LAMP RETAINER SOCKET
0020-20897 LAMP RETAINER SOCKET . 2nd Source New.
-
0020-23041 Clamp Shield
0020-23041 Clamp Shield . 2nd Source New.
-
0020-24018 PIN ANTENNA PCII POLI SI
0020-24018 PIN ANTENNA PCII POLI SI . 2nd Source New.
PARKDISC 450 ROTATING PLATFORM - Rotating platform for car Request info. CAD. RDT Elevazione MOVING AND TURNING PLATFORMS - Rotating, moving platform for car Request...
Alan Maddrell. Alan wrote for N64, NGC and other Future magazines back when the earth was still cooling. While the other Rotating Platformers bring experience, wit and the ability to talk engagingly...
A revolving platform will enable you to make beautiful photos and videos fast. It makes photographing large products like sofas, mopeds and white goods easy. Car dealers also use a revolving platform...
Rotating platform | Podium Car Display for car dealership ACCESSORIZED POWERED BY Be different, be Visible, it’s that simple !...
MAR-85L rotation stage provides precise, fine rotation for optomechanical assemblies. When the steel locking thumbscrew is unlocked, the stage can be smoothly and continuously rotated by hand through...
Screw a nut on the base's bolt (as shown in the photo) and then screw the platform, holding the bolt with one hand. Tighten the nut below the platform to offer stability while rotating. Your 360...


